3D-FPV BlackBird-2 Camera Module

The 3D FPV camera The BlackBird 2 is a high-quality and technologically advanced flight stereo camera for flying from first person view (FPV)! The camera generates the stereoscopic analog video in real time using the powerful FPGA chip. The video, which formed The BlackBird 2 has a clear and vivid picture, as it incorporates high-quality video sensor of the company Aptina that allows you to get maximum pleasure from using The BlackBird 2. The stereo camera The BlackBird 2 is recommended to use as a flight camera on a radio controlled model quadrocopter, cars, aircraft, etc. Also you can use it in your surveillance system.

FEATURES:

1. Wireless video transmission in 3D with a single video transmitter
2. Very popular 3D video format supported by many devices: 3D video glasses, 3D TVs, etc
3. Crop 16:9 is special 3D video format for 3D FPV headset type Oculus Rift or other hats built on a single display
4. 3D Interlace comfortable 3D video format to work with third-party OSD modules
5. 2D video mode
6. Dual-channel 3D video mode allows you to obtain the best stereo image
7. Plugins available
8. The voltage from 5 to 15 Volts and up to 150 mA consumption
9. Video in 3D: People look at the world with two eyes and see its volume, it allows to man to orientate better in the space, gives the sense of speed and distance… When you use traditional 2D FPV camera, it is the same as to look at the world with one eye – to see the world flat, to see the world in 2D. Using 3D FPV camera The BlackBird you will receive 2 new sensations and emotions, you will look at the world with two eyes, you will see the world in volume – to see in 3D.
10. Video modes: The 3D FPV camera The BlackBird 2 provides the various video formats: 3D SIDE BY SIDE 3D SIDE BY SIDE CROP 16:9, 3D SIDE-BY-SIDE CROP manual, INTERLACE 3D, 2D videomode, dual-channel videomode. The extensive number of supported video formats enables you to use flight stereo camera The BlackBird 2 almost with all equipment, whether it be 3D TV/monitor, 3D video glasses or stereogram for FPV.

SPECIFICATIONS:

Video sensor:

• Model: Aptina MT9V136
• Size and type of the matrix: 1/4'' CMOS
• Size of the array of pixels: 680 x 512
• Sensitivity: 11.9V / Lux- sec @ 550nm
• Signal / noise ratio: 45 dB

Optics:

• Focal length of the lens: 2.5 mm
• Angle of view (full frame): 90°
• Thread type: М12 х 1
• IR filter on the lens: 680 nm (day lens for color cameras)
• Focus operation: by hand

Video output:

• Video format: NTSC 525/60
• Horizontal resolution: 550 TVL
• Video output: 75 ohm, scope 1V

Stereo:

• Stereo base: 42 mm
• 3D formats: side by side 16:9 cropped,side by side 4:3 cropped,side by side 4:3,side by side horizontally scaleable ,Interlaced (Field Sequential 3D 4:3)
• Frame rate for each eye: 60 Hz
• Adjusting the convergence: by hand, shifting the lens holder

Electrical specifications:

• Supply voltage: 5V - 15V
• Current consumption at 12V: 150 mА
• Power consumption at 5V: 2.2 W
• Power consumption at 12V: 1.8 W Type of connectors
• Interface connector: DF13-10P-1.25H
• Operating temperature from:  -30º C to + 50º C

PIN CONFIGURATIONS:

RELATED DOCUMENTS:

1. User Manual.
2. Software.

PACKAGE INCLUDES:

1. 1 X 3D-FPV BlackBird-2 Camera Module