Schneider Electric: Infinity Smart Sensor 6-Button Keypad with LCD - TTS-SD-LCD-1

Smart Sensor Series

The Smart Sensor Series combines an attractive display with a room temperature sensor to provide
users with a cost effective way to view or modify VAV box operation. It is designed for use with the Andover Controls i2 and b3 field controllers and can also accomplish many local control and monitoring tasks.

The standard Smart Sensor provides an LCD display and a 6 button programmable keypad that enables operators and occupants to change setpoints, monitor occupancy status and turn equipment on and off. An alternative version of the Smart Sensor is also available with a 4-button keypad.

The function keys can be custom programmed to perform a wide variety of functions, including switching a specific zone to occupied mode, signaling an alarm condition, adjusting the amount of override time, arming or disarming a security system, and enforcing password security. Programming the display and function keys is done with Andover Continuum’s Plain English® programming language.

The Smart Sensor comes in a well-ventilated plastic enclosure. The active sensing element is a highly stable, precision thermistor, accurate to within ± 0.36 °F (± 0.2 °C). The sensor has an operating range of 32 to 105 °F (0 to 40 °C).

Both versions of the Smart Sensor provide a connection for the Andover Continuum RoamIO-2 Lap-Top Service Tool.

FEATURES

• Accurate, reliable 10K Type III Thermistor
• LCD display
• Programmable Keypad
• Built-In service port to be used with the
• RoamIO-2 Service Tool
• Powered directly from an i2 or b3 Field Controller

 

SPECIFICATIONS

Sensing Element

10K Type III Thermistor, 10,000 ohms at 77 °F (25 °C)

Range:

32 to 105 °F (0 to 40 °C)

Accuracy

Thermistor ± 0.36 °F (± 0.2 °C)

Stability

Thermistor will not deviate from accuracy
specification for minimum of 5 years.

Wire Specifications

18 (0.823 mm2) to 24 gauge (0.205 mm2), 3
conductor, unshielded wire. An additional single pair
twisted shielded is required for Lap-Top Service Tool
connection.

Maximum Distance to Sensor

18 gauge (0.823 mm2) wire: 1,200 ft. (366 m) with less than 0.18 °F (-17.67 °C) error
20 gauge (0.518 mm2) wire: 790 ft. (241 m) with less than 0.18 °F (-17.67 °C) error
22 gauge (0.326 mm2) wire: 500 ft. (152 m) with less than 0.18 °F (-17.67 °C) error
24 gauge (0.205 mm2) wire: 300 ft. (91 m) with less than 0.18 °F (-17.67 °C) error

Dimensions

4.50” H x 3.50” W x 0.813” D (11.5 cm H x 8.9 cm W x 2.0 cm D)

Color

Off-white

Power

One Smart Sensor is powered directly from an i2 or b3 field controller.