Phoenix Contact Feed Through Terminal Block - TB 10 EI

FEATURES:

1. Number of levels: 1
2. Number of connections: 2
3. Rated surge voltage: 8 kV
4. Pollution degree: 3
5. Connection in acc. with standard: IEC 60947-7-1
6. Shock protection test specification: DIN EN 50274 (VDE 0660-514):2002-11
7. Bending test rotation speed: 10 rpm
8. Bending test turns:135
9. Conductor cross section tensile test: 1.5 mm²
10. Conductor cross section tensile test: 10 mm²
11. Conductor cross section tensile test: 16 mm²
12. Requirements, voltage drop:  ≤ 3.2 mV
13. Conductor cross section short circuit testing: 10 mm²
14. Short-time current: 1.2 kA

SPECIFICATION:

1. Maximum load current: 57 A
2. Nominal current IN: 55 A
3. Nominal voltage UN: 800 V (in the case of enclused clamping space) 
4. Surge voltage test setpoint: 9.8 kV
5. Power frequency withstand voltage setpoint: 2 kV
6. Proof of thermal characteristics (needle flame) effective duration: 30 s
7. Temperature index, insulating material (DIN EN 60216-1 (VDE 0304-21)): 125 °C
8. Note: Terminal point
9. Connection method: Screw connection
10. Connection in acc. with standard: IEC 60947-7-1
11. Conductor cross section AWG min: 16
12. Conductor cross section AWG max: 6
13. Min. AWG conductor cross section, flexible: 16
14. Max. AWG conductor cross section, flexible: 8
15. Stripping length: 10 mm
16. Screw thread: M4
17. Tightening torque, min: 1.4 Nm
18. Tightening torque max: 1.5 Nm

PARAMETERS:

1. Width: 10.2 mm
2. End cover width: 1.8 mm
3. Length: 42.5 mm
4. Height NS 35/7,5: 47 mm
5. Height NS 35/15: 54.5 mm
6. Height NS 32: 52 mm

PACKAGE INCLUDES:

1. 1 XPhoenix Contact Feed Through Terminal Block-TB 10 EI